promotion-img


Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
Tools & Containers arrow RTV-2矽橡膠 (Silicone Rubber)

Tools & Containers

RTV-2矽橡膠 (Silicone Rubber)

RM330.20

RTV-2矽橡膠 (Silicone Rubber)
做出个性化,
个人风格和独一无二
属于您自己的模型。
食品級翻膜矽膠 符合 FDA是一種無毒害環保材料。
此产品為二液型,由主劑和硬化劑構成,加入定量的硬化劑,混合攪拌而硬化。
翻模加工程序: 
1. 將矽膠先少量倒入空的塑膠瓶或紙杯.秤重約 100g , 此时可以先用竹筷搅拌,增加流动性。再將硬化劑倒入矽膠約 2 cc 
A剂和B剂的比例为1kg : 20cc
2. 硬化劑倒入後開始攪拌.
剛開始攪拌時.有點像水一樣.
攪拌約1-2分.
會感覺在攪拌時有阻力.
此時己攪拌均勻,
搅拌均匀很重要哦!
3. 將攪拌好的矽膠開始倒入模型,可找塑膠空瓶當外模, 
如需作出更光滑表面的矽膠模.
則可在模型先塗抹一層薄薄的凡士林當離形劑.
4. 矽胶倒入膜时,會產生一些氣泡. 可以使用简易的手动吹气、把表面的泡泡吹掉。更简单一点的话,可以用筷子随意把表面轻画几下,帮助消泡。
5. 耐心等待,完全硬后就可以直接使用。
Available at :
Natural Wellbeing Sdn. Bhd.
Packaging : 5kgs 
Price : RM350

RTV-2 Silicone is a type of silicone rubber made from a two-component system (base plus curative; A+B)
Step One: 
Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. 
Notes
Our mould making silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will give birth to difficulties in your final operation. 
Step Two: 
Perfusion moulding use Vaseline 
It is suitable for simple products with the smooth surface. Without any mold lines, which helps you save time and is easy for operation. 
Step Three : Evenly and slowly perfuse the mixed silicone rubber into the square frame. 
After the cross linking reaction and the silicone rubber turns dry, you can take the products out. Thus, the mold has been done. 
(Note: we usually use soft silicone rubber to make molds by perfusing, which is easy for demoulding and will not damage the product in the silicone molds.)
Available at :
Natural Wellbeing Sdn. Bhd.
Packaging : 5kgs 
Price : RM350

Weight : 5 KG

Ask a question about this product





Product